[Imported ultrasonic] daily maintenance and maintenance of ultrasonic cleaning machine
1. Keep the equipment working place ventilated, dry and clean, which is conducive to the long-term efficient operation of the equipment and optimize the working environment conditions;
2. When the cleaning fluid is too dirty, it should be treated in time, and the dust in the cleaning tank and the storage tank should be cleaned regularly to keep the cleaning tank and the appearance clean, which can improve the durability of the cleaning tank;
3. Keep the electrical control box and equipment vents away from water vapor, corrosive gas and dust, and clean the attached dust with compressed air regularly;
4. Test the insulation performance of the equipment regularly, check the aging electrical components regularly, check the grounding wire, and ensure that the equipment is well grounded. This project must be carried out by an electrician with professional experience;
5. Regularly test the power supply to confirm that it meets the power supply voltage requirements of the equipment, and avoid long-term operation under unstable power supplies that are too high or too low;
6. Equipment with filtering device, replace the filter element regularly;
7. If there is a transmission organization, grease, oil and other smoothing agents should be added regularly as required, and the gear oil of the reducer should be replaced regularly to ensure that the moving parts are operated under good smooth conditions;
